Translation of EEG spatial filters from resting to motor imagery using independent component analysis.

Electroencephalogram (EEG)-based brain-computer interfaces (BCIs) often use spatial filters to improve signal-to-noise ratio of task-related EEG activities. To obtain robust spatial filters, large amounts of labeled data, which are often expensive and labor-intensive to obtain, need to be collected in a training procedure before online BCI control. Several studies have recently developed zero-training methods using a session-to-session scenario in order to alleviate this problem. To our knowledge, a state-to-state translation, which applies spatial filters derived from one state to another, has never been reported. This study proposes a state-to-state, zero-training method to construct spatial filters for extracting EEG changes induced by motor imagery. Independent component analysis (ICA) was separately applied to the multi-channel EEG in the resting and the motor imagery states to obtain motor-related spatial filters. The resultant spatial filters were then applied to single-trial EEG to differentiate left- and right-hand imagery movements. On a motor imagery dataset collected from nine subjects, comparable classification accuracies were obtained by using ICA-based spatial filters derived from the two states (motor imagery: 87.0%, resting: 85.9%), which were both significantly higher than the accuracy achieved by using monopolar scalp EEG data (80.4%). The proposed method considerably increases the practicality of BCI systems in real-world environments because it is less sensitive to electrode misalignment across different sessions or days and does not require annotated pilot data to derive spatial filters

Building Mechanical System Design for New Science Workplace

This project report analyzes a research and development building designed for a conglomerate corporation in Seoul, South Korea. Cannon Design was the architectural and engineering designer for this 1.2 million ft^2 research and development center. The building was designed as a “New Scientific Workplace” to enhance tenants’ productivity, efficiency, and creativity. This study uses the second floor of the pharmaceutical high-rise as its design scope.The report is comprised of an original design summary, a load calculation revisit, a system design evaluation, a ductwork/pipework study, and, finally, an energy evaluation

From Tin to Pewter: Craft and Statecraft in China, 1700-1844

This dissertation examines the transmissions of technology and changes in the culture of statecraft by tracing the itinerary of tin from ore in mines to everyday objects. From the eighteenth century, with the expansion of the Qing empire and global trade, miners migrated from the east coast of China to the southwest frontiers of the Qing empire (1644-1912) and into Southeast Asia, bringing their mining technology with them. The tin from Southeast Asia, in return, inspired Chinese pewter artisans to invent new styles and techniques of metalworking. Furthermore, the knowledge of mining, metalworking, and trade was transferred from miners, artisans, and merchants into the knowledge system of scholar-officials, gradually changing the culture of statecraft in the Qing dynasty. This dissertation explores how imperial expansion and the intensive material exchange brought by global trade affected knowledge production and transmission, gradually changing the culture of statecraft in China. In the Qing dynasty, people used tin, the component of two common alloys, pewter and bronze, to produce objects of daily use as well as copper coins. Thus, tin was not only important to people’s everyday lives, but also to the policy-making of the Qing state. In this way, tin offers an exceptional opportunity to investigate artisans and intellectuals’ approach to technology, while it also provides a vantage point from which to examine how Qing bureaucrats managed the world, a world of human and non-human resources. My dissertation stands at the intersection of the history of science and technology, art history, intellectual history, and the history of global trade. It broadens the scope of the history of science in China by demonstrating how artisans’ practice was crucial to the production of mining treatises. It contributes to the study of science, technology, and society by showing that the transmission of and innovations in technology should be situated in the context of social, cultural, trade, and ecological networks. Finally, I argue that mid-Qing scholars’ efforts to collect practical knowledge changed the culture of governance from Confucian moral didacticism to technocratic epistemology. Qing bureaucrats, Manchu and Han alike, utilized practical knowledge from artisans and merchants in their policy-making process. By emphasizing the entanglement of technology and statecraft, my project contributes to intellectual history and enhances our understanding of the logic of bureaucracy of the Qing empire. My dissertation consists of five chapters. Each chapter uses different methodologies and covers different geographical regions. Chapter One engages with the history of science by demonstrating how scholars translated and codified miners’ vernacular knowledge of mining into mining treatises. Chapter Two examines the semi-autonomous mining community in Yunnan to illustrate that the social organization of miners, which I define as the “social technology” of mining, contributed to the formation of the capital- and labor- intensive mining industry. Chapter Three moves to the island of Bangka (in present-day Indonesia) and focuses on the transmission of mining technology from China to Southeast Asia. Through comparison, I show that the miners in Yunnan and Bangka formed similar (semi-)autonomous social organizations. I argue that it was this social technology that enabled the transmission of Chinese mining technology across geographical regions and laid the foundation for the Chinese dominance of the mining industry in Bangka. The cases of Chinese mining technology in Yunnan and Bangka challenge the modern understanding of technology by showing that technology was not just about tools and machines. Before the 1850s, both Qing bureaucrats and European colonizers considered the social organization of mining to be critical to technological progress. Chapter Four moves back to China to study the formation of Guangdong style pewter. Utilizing visual and material sources, I examine how the introduction of tin from Southeast Asia led to innovations in metallurgy, and how European silver and porcelain inspired stylistic changes. I argue that technology and innovations should be understood in the context of social, economic, material and ecological networks. The final chapter moves to Beijing and Jiangnan area to engage with the institutional history of the Qing empire. Through a case study of monetary reform undertaken in 1740, this chapter reveals that Qing bureaucrats acquired and applied practical expertise to their administrative work. Through their close interactions with artisans and merchants, Qing bureaucrats developed a distinctive vision of statecraft (jingshi). Before the late nineteenth century, the sovereignty of the Qing state was not exercised in the extraction and monopoly over natural resources. Instead, the Qing state relied on the market to acquire most of the natural resources they needed. By focusing on tin, this dissertation shows that the Qing state exercised its political power through material production and paid more attention to the management of skilled labor, capital, and the proper allocation of human and non-human resources

Numerical Modelling of Oblique Subduction in the Southern Andes Region

The Southern Andes is an important region to study strain partitioning behavior due to the variable nature of its subduction geometry and continental mechanical properties. Along the plate margin between the Nazca plate and the South American plate, the strain partitioning behavior varies from north to south, while the plate convergence vector shows little change. The study area, the LOFZ region, lies between 38⁰S to 46⁰S in the Southern Andes at around 100 km east of the trench. It has been characterized as an area bounded by margin-parallel strike-slip faults that creates a forearc sliver, the Chiloe block. It is also located on top of an active volcanic zone, the Southern Volcanic Zone (SVZ). This area is notably different from the Pampean flat-slab segment directly to the north of it (between latitude 28⁰ S and 33⁰ S), where volcanic activity is absent, and slip seems to be accommodated completely by oblique subduction. Seismicity in central LOFZ is spatially correlated with NE trending margin-oblique faults that are similar to the structure of SC-like kinematics described by Hippertt (1999). The margin-oblique faults and rhomb-shaped domains that accommodate strain have also been captured in analog experiments by Eisermann et al. (2018) and Eisermann relates the change in GPS velocity at the northern end of LOFZ to a decrease in crustal strength southward possibly caused by the change in dip angle. This project uses DOUAR (Braun et al. 2008), a numerical modelling software, to explore the formation of the complex fault system in the LOFZ in relation to strain partitioning in the Southern Andes. We implement the numerical versions of the analog models from Eisermann et al. (2018), called the MultiBox and NatureBox models to test the possibility to reproduce analog modelling results with numerical models. We also create simplified models of the LOFZ, the Natural System models, to compare the model displacement field with deformation pattern in the area. Our numerical model results in general replicate the findings from MultiBox experiment of Eisermann et al. (2018). We observe the formation of NW trending margin-oblique faulting in the central deformation zone, which creates rhombshaped blocks together with the margin-parallel faults. More strain is accommodated in the stronger part of the model, where the strain is more distributed across the area or prefers to settle on a few larger bounding faults, whereas in the weaker part of the model, the strain tends to localize on more smaller faults. The margin-oblique faults and rhomb-shaped domains accommodating strain is not present in the Natural System models with and without a strength difference along strike. This brings the question about the formation of the complex fault system in both the analog models and our numerical versions of them and hypothesis other than a strength gradient could be tested in the future

An “Assurance of Security” or “Agent of Tracking”? An Empirical Study of the Impact of Vocational Education on Social Mobility

Published in the Journal of East China Normal University (Educational Sciences), this study drew on data from the China Family Panel Survey (CFPS) by the Institute of Social Science Survey at Peking University as the research sample to examine the impact of education on social mobility as well as the influences of the registered residence, administrative region and other factors on social mobility of populations with different educational levels. The descriptive analysis and linear regression methods were adopted in the research

Assessing the feasibility of online SSVEP decoding in human walking using a consumer EEG headset.

BackgroundBridging the gap between laboratory brain-computer interface (BCI) demonstrations and real-life applications has gained increasing attention nowadays in translational neuroscience. An urgent need is to explore the feasibility of using a low-cost, ease-of-use electroencephalogram (EEG) headset for monitoring individuals' EEG signals in their natural head/body positions and movements. This study aimed to assess the feasibility of using a consumer-level EEG headset to realize an online steady-state visual-evoked potential (SSVEP)-based BCI during human walking.MethodsThis study adopted a 14-channel Emotiv EEG headset to implement a four-target online SSVEP decoding system, and included treadmill walking at the speeds of 0.45, 0.89, and 1.34 meters per second (m/s) to initiate the walking locomotion. Seventeen participants were instructed to perform the online BCI tasks while standing or walking on the treadmill. To maintain a constant viewing distance to the visual targets, participants held the hand-grip of the treadmill during the experiment. Along with online BCI performance, the concurrent SSVEP signals were recorded for offline assessment.ResultsDespite walking-related attenuation of SSVEPs, the online BCI obtained an information transfer rate (ITR) over 12 bits/min during slow walking (below 0.89 m/s).ConclusionsSSVEP-based BCI systems are deployable to users in treadmill walking that mimics natural walking rather than in highly-controlled laboratory settings. This study considerably promotes the use of a consumer-level EEG headset towards the real-life BCI applications